Creative Live! Drive IR SB0010 Manuel d'utilisateur télécharger pdf (Page 6)

6 Live! Drive IR Quick Start SB0010

Adjusting Headphones

Volume and Microphone

Gain

If your headphones and microphone are attached to the Live! Drive IR, the headphones volume

and microphone gain can be adjusted in two ways.

Using the Live! Drive IR

Control Knobs

On the front panel of the Live! Drive IR, turn the respective control knob:

❑ Counter-clockwise to decrease the headphones volume or microphone gain.

❑ Clockwise to increase the headphones volume or microphone gain.

Using Creative Surround Mixer To adjust the headphones volume:

1. Click Start -> Programs -> Creative -> Sound Blaster Live! -> Surround Mixer.

2. On the Mixer deck (lower portion of Surround Mixer), if the button below the VOL slider is

not highlighted, click it to unmute the output sound.

3. Adjust the VOL slider.

To adjust the microphone gain:

1. Click Start -> Programs -> Creative -> Sound Blaster Live! -> Surround Mixer.

2. On the Mixer deck (lower portion of Surround Mixer), click any of the audio input source

icon, and then select the Line In 2/Microphone 2 icon.

3. If the button below the Line In 2/Microphone 2 slider is not highlighted, click it to unmute

the audio input source.

4. Adjust the slider under the Line In 2/Microphone 2 icon.

It is recommended that you set the

headphones volume level and

microphone gain level to 75% in

Surround Mixer, and use the

control knobs on the Live! Drive

IR to make further adjustments.

Even if you turn the control knob

on the Live! Drive IR to the

maximum, your headphones will

have no sound if you set the

headphones volume level to 0% or

mute it in Surround Mixer. The

same applies for your

microphone.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Pas de commentaire

Creative Live! Drive IR SB0010 Manuel d'utilisateur Page 6