Creative Live! Drive IR SB0010 Manuel d'utilisateur télécharger pdf (Page 4)

4 Live! Drive IR Quick Start SB0010

Switching

Audio Input Sources

On your Sound Blaster Live! and Live! Drive IR, two audio input sources may share a

connection. In such cases, only one of the input source can be enabled and used at any one time.

If your audio card has an I

S connector, you can use only either one of the following inputs at

any one time:

❑ I

❑ Line In 2 or Line In 2/Mic In 2

To switch the audio input source:

1. Click Start -> Programs -> Creative -> Sound Blaster Live! -> Surround Mixer.

2. On the Mixer deck (lower portion of Surround Mixer), click any of the audio input source

icon, and then select either the I

S In or Line In 2/Microphone 2 icon.

3. Click the red plus sign above the I

S In or Line In 2/Mic In 2 icon.

4. In the Other Advanced Controls dialog box, select the Enable Line In 2/Mic In 2 check

box to enable the Line In 2/Mic In 2 input source. Clear the check box to enable I

S In.

If your Live! Drive IR has Aux In 2 connectors, you can use only either one of the following

inputs at any one time:

❑ Aux In 2

❑ SPDIF In (Coaxial or Optical)

To switch the audio input source:

1. Click Start -> Programs -> Creative -> Sound Blaster Live! -> Surround Mixer.

2. On the Mixer deck (lower portion of Surround Mixer), click any of the audio input source

icon, and then select either the SPDIF In or Auxiliary 2 icon.

3. Click the red plus sign above the SPDIF In or Auxiliary 2 icon.

4. In the Other Advanced Controls dialog box, select the Enable Auxiliary 2 check box to

enable the Auxiliary 2 input source. Clear the check box to enable SPDIF In.

You need to install the software

first before you can switch audio

input sources.

However, if the SPDIF Bypass

feature and Aux In 2 are both

enabled, both the SPDIF In and

Aux In 2 channels will be

available.

For details on the SPDIF Bypass

feature, see “Digital I/O” on page

14.

1 2 3 4 5 6 7 8 9 ... 21 22

Pas de commentaire

Creative Live! Drive IR SB0010 Manuel d'utilisateur Page 4