Creative SB0090 Spécifications télécharger pdf (Page 57)

Troubleshooting B-3

Individual analog recording sources cannot be selected in Surround Mixer.

Five analog recording sources are combined under the selection

Analog Mix (Line/

CD/TAD/Aux/PC)

. For more information, see “Individual analog recording sources

are not displayed in Surround Mixer.” on page B-2.

To record an individual analog source:

❑

In the one-column record panel of Surround Mixer, make sure the recording

source selected is

Analog Mix (Line/CD/TAD/Aux/PC)

❑

In the six-column panel, mute the analog sources that you do not want to record

by clicking the

Mute

check box to select it.

No sound from the speakers.

Check the following:

❑

You have connected your speakers to your card's output.

❑

You have selected the correct source in the Mixer panel.

❑

If both the above conditions have been met and you still do not get any sound,

click the

red plus sign

above the

VOL

control and check whether the

Digital

Output Only

check box is selected. If it is, you are in the Digital Output Only

mode and so must connect to digital speakers to hear the sound from your audio

card. See the section on Digital Output Only in Surround Mixer’s online Help for

more information.

No audio output when playing digital files such as .WAV, MIDI files or AVI clips.

Check the following:

❑

The speakers’ volume control knob, if any, is set at mid-range. Use Creative Mixer

to adjust the volume, if necessary.

❑

The powered speakers or external amplifier are connected to the card’s Line Out

or Rear Out jack.

❑

There is no hardware conflict between the card and a peripheral device. See

“Resolving I/O Conflicts” on page B-9.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 70 71

Commentaires sur ces manuels

Pas de commentaire

Creative SB0090 Spécifications Page 57

Commentaires sur ces manuels