Creative DE5621 Manuel d'instructions télécharger pdf (Page 24)

accQcomm Interface Module

Section 2 Installation and Operation

2-12

Note

For the accQmin flow meter, the accQcomm displays and

transmits secondary level data at 10X the actual value when

using Standard Data format. This should be considered when

setting up alarm conditions and analog outputs. This will not

occur with an accQmin using Reduced Data format.

Testing Analog Outputs To verify that the analog outputs are functioning properly.

1. Attach the leads of a current meter to the output circuit to

be tested.

2. Click Test Analog Outputs to open the test dialog.

Figure 2-10 Analog output test dialog

3. Select a COM port and baud rate for communication.

4. Select the channel and enter a current value in mA.

5. Click Test Output.

The measured current value should match the set value,

until or unless changed by another event or action.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Pas de commentaire

Creative DE5621 Manuel d'instructions Page 24